SW56235315
一款輕質、堅固且可靠的自承式 3 人帳篷,適合高山徒步旅行。
特點
‧ 營底蓆 - 需另外單獨購買
‧ 維修套件
‧ 車門儲物袋
‧ 不同的開門方式
‧ 拉鍊附有防夾片
‧ 尼龍掛鉤,即使在寒冷的環境下也能固定住
‧ 可伸縮、可更換的錨點
‧ 繩鎖
‧ 加長拉線織帶
‧ 加強型 Hypalon 套筒精加工
‧ 前廳延伸解決方案
‧ 100%自承式建築
規格
區域內帳篷
3.47 平方米
區域 前廳 前面
0.74平方米
入口
1
內帳高度
1.07米
包裝尺寸
40×20厘米
使用人數
3人
通風
1
通風型
帶拉鍊的通風面板
用於存放裝備和烹飪的前廳
是的
前廳
1
最大重量
2.96公斤
最小重量
2.6公斤
材料
地面
塗層地板:PU 塗層,地板:70D 尼龍,內部:20D 尼龍防撕裂,帶網狀和蚊帳入口
天幕
塗層外帳:PU 塗層,外帳:50D 聚酯纖維防撕裂
拉線
反光尼龍
營繩數量
4
釘子
Y 形釘鋁製 14.5 厘米
釘數量
10
營柱直徑
8.5毫米
營柱數量
3
營柱
7001 T6鋁
帳篷搭建
半測地線雙層牆
營底防水度
5000毫米
天幕防水度
3000毫米
防風
慕尼黑工業大學風道批准的最低風速為 90 公里/小時
細節
Litetrek III 是一款可容納 3 人的雙層帳篷,專為高山地形中的輕型徒步旅行而設計,其中抵禦惡劣天氣、防風穩定性、重量輕和緊湊的包裝尺寸是關鍵。 其三季規格針對一年中氣候溫和的月份進行了優化。 慕尼黑工業大學對時速 90 公里時的穩定性進行了測試。
其堅固、可靠的半測地線雙壁結構在您和自然元素之間放置了兩層織物,可充分利用空間並確保防風雨和通風的最佳平衡。 100% 自支撐設計意味著您可以在岩石地形或沒有足夠空間設置拉線和樁的高山場地上毫無問題地進行投球。 或者,可以擴展錨點以獲得更大的靈活性,例如在雪地上。 其非常抗撕裂的50D 防撕裂聚酯外帳採用PU 塗層,可提供3,000 毫米的防水度,地板由堅固的PU 塗層70D 防撕裂尼龍製成,可提供5,000 毫米的防水度,而66D防撕裂聚酯內帳則具有網狀和蚊帳入口。 通風通過帶拉鍊的後面板進行調節(可從內部和外部操作),使您可以調節新鮮空氣供應並防止潮濕。
此外,我們的 3S 快速設置解決方案具有短而平的套筒和掛鉤,可讓您快速有效地一次設置。 在天氣好的時候或美好的夜晚,您可以選擇極簡風格,單獨放置外帳。 另請參閱用於存放裝備和烹飪的防風雨前廳,該前廳集成到內部帳篷中,或者可以根據需要進行擴展。
A lightweight, robust and reliable, self-supporting 3-person tent for alpine trekking.
Features
‧ Footprint available - Buy it separately
‧ Repair set
‧ Door Storage Pockets
‧ Different door opening options
‧ Zipper with anti-catch flap
‧ Nylon hooks for fixing the fly even in cold conditions
‧ Extendable and replaceable anchor points
‧ Cord locks
‧ Extended guy line webbing
‧ Reinforced Hypalon sleeve finishing
‧ Vestibule extension solution
‧ 100% Self supporting construction
Specifications
Area Inner Tent
3.47 m²
Area Vestibules Front
0.74 m²
Entrances
1
Height Inner Tent
1.07 m
Packing Size
40 x 20cm
Persons
3 Persons
Ventilations
1
Ventilation type
Ventilation panel with zippers
Vestibule for gear storage and cooking
Yes
Vestibules
1
Weight Max
2.96 kg
Weight Min
2.6 Kg
Material
Floor
Coating Floor: PU Coated, Floor: 70D Nylon, Innertent: 20D Nylon Ripstop with mesh and mosquito net entrance
Fly
Coating Fly Sheet: PU Coated, Flysheet: 50D Polyester Ripstop
Guy lines
Reflective Nylon
Guy lines quantity
4
Pegs
Y-Pegs Aluminium 14,5 cm
Pegs quantity
10
Pole diameter
8.5 mm
Pole quantity
3
Poles
7001 T6 Aluminium
Tent construction
Semi geodesic double wall
Watercolumn Floor
5000 mm
Watercolumn Fly
3000 mm
Wind Protection
Minimum 90 km/h windspeed approved in the windchannel of Technical University of Munich
Details
The Litetrek III is a 3-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during the milder months of the year. Wind-tunnel tested for stability at 90 km/h by the Technical University of Munich.
Its robust, reliable semi-geodesic, double wall construction puts two layers of fabric between you and the elements, enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its very tear-resistant 50D ripstop polyester flysheet is PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 70D ripstop nylon that gives a 5,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.
In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. See also the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.