登山露營 CAMP & HIKE
  • 品牌 Brands
  • 男裝 Men’s
  • 活動 Activities
  • 女裝 Women’s
  • 10410

    鞋底修補膠 Aquaseal SR Shoe Repair Adhesive

    Aquaseal SR 防水、透明、柔韌且可持續使用多年

    特點
    • 耐用-堅韌的聚氨酯黏合劑永久黏合在表面上,乾燥後就像透明橡膠一樣耐候
    • 柔韌 – 固化成彈性橡膠,可與所有類型的鞋類一起彎曲,包括防滑釘、運動鞋、工作靴和涼鞋
    • 耐磨 - 透過承受刮擦和刮痕來保持齒輪美觀
    • 防水 – ​​提供防水密封,不會隨著時間的推移而剝落或破裂
    • 多用途-可黏合皮革、絨面革、橡膠、氯丁橡膠和帆布鞋

    規格
    材質:熱固性聚氨酯
    尺寸:1 盎司
    顏色: 透明
    黏附於:皮革、絨面革、橡膠、氯丁橡膠、帆布和尼龍
    應用溫度:60° 至 100°F(相對濕度高於 40%)
    固化時間:8-12小時
    使用溫度:-20° 至 180°F
    儲存:裝入袋中冷凍保存
    美國製造

    用法
    修補脫落鞋底:
    1. 以刷子或酒精徹底清除汙泥及殘膠
    [此步驟相當重要]
    2. 平均的塗上一層膠水
    3. 以重物壓或膠帶、固定夾固定,放置一夜,使其充分乾燥

    修補鞋邊脫落:
    1. 以刷子或酒精徹底清除汙泥及殘膠。
    2. 在鞋子裡面填充舊報紙或其他東西,緊撐鞋面。
    3. 以牙籤或細刷在鞋邊縫隙塗上膠,再以膠帶綑緊(配合原子筆),施加壓力使其緊緊貼合
    4. 乾躁24小時

    修補磨損鞋跟:
    1. 以剉刀或砂紙粗糙欲修補區域,再以酒精清理乾淨
    2. 以乾淨膠帶在鞋跟邊緣貼成一小水壩再上膠
    3. 保持水平,待其乾燥過夜。較厚區域可能需48小時 
    4. 對於橡膠產品提供優越黏附力,耐磨性,靈活性和防水,無論任何鞋子均可安心使用
    5. 提供所有鞋類的修復與補強使用

    溫馨提示
    鞋類專用修補膠表面有較小的摩擦力,例如在雪地、冰上、岩石或濕滑的地面等。大面積修補過的鞋子請當心使用,如有必要增加其摩擦力時可在上膠時灑上一些鹽巴,待乾躁後再以水將鹽巴洗去。

    本品含有甲苯,請在通風良好的環境中使用。請遠離高熱及火源區,避免長時間與皮膚接觸,存放請遠離兒童可及之處。

    細節
    使用 Aquaseal SR 在家中或野外永久固定鞋類。這種修鞋膠以前稱為 Freesole,具有防水性,乾燥後成為透明、柔韌的膠水,可持續使用多年。只需一根 1 盎司的小管,即可輕鬆完成靴子修復、打造耐用的腳趾保護裝置並重建磨損的腳跟。不受炎熱或寒冷的影響,進行重型鞋子修理,無論是在工地還是在山頂,都能承受惡劣的天氣。從橡膠靴到鋼頭鞋以及介於兩者之間的所有鞋子,都可以使用 Aquaseal SR 修復和加固您的鞋子。

    Aquaseal SR is waterproof, clear, flexible and will last for years

    Features
    • Durable – Tough polyurethane adhesive permanently bonds to the surface and dries like clear rubber to withstand the weather
    • Flexible – cures to a resilient rubber that flexes with all types of footwear, including cleats, sneakers, work boots and sandals
    • Wear Resistant - Keeps gears looking good by withstanding scrapes and scratches
    • Waterproof – Provides a waterproof seal that won’t peel or crack over time
    • Versatile – bonds to leather, suede, rubber, neoprene and espadrilles

    Specification
    Material: thermosetting polyurethane
    Size: 1 oz
    Color: transparent
    Adhere to: leather, suede, rubber, neoprene, canvas and nylon
    Application temperature: 60° to 100°F (relative humidity above 40%)
    Curing time: 8-12 hours
    Operating temperature: -20° to 180°F
    Storage: Store in bags and freeze
    Made in USA

    Usage
    Repair peeling soles:
    1. Completely remove sludge and residual glue with a brush or alcohol
    [This step is very important]
    2. Apply a layer of glue evenly
    3. Fix it with heavy objects or tape or fixing clips, and leave it overnight to allow it to fully dry.

    Repair shoe edges that have fallen off:
    1. Use a brush or alcohol to completely remove sludge and residual glue.
    2. Fill the shoes with old newspapers or other materials to tighten the uppers.
    3. Use a toothpick or fine brush to apply glue to the gap on the edge of the shoe, then tie it tightly with tape (with a ball pen), and apply pressure to make it fit tightly.
    4. Dry for 24 hours

    Repair worn heels:
    1. Use a knife or sandpaper to roughen the area to be repaired, and then clean it with alcohol.
    2. Use clean tape to form a small dam on the edge of the heel and then apply glue.
    3. Keep it level and let it dry overnight. Thicker areas may take up to 48 hours
    4. Provides superior adhesion, wear resistance, flexibility and waterproofing for rubber products, so it can be used with confidence regardless of any shoe.
    5. Provide repair and reinforcement for all footwear

    Reminder
    The surface of special repair glue for shoes has less friction, such as on snow, ice, rocks or slippery ground. Please be careful when using shoes that have been repaired on a large area. If it is necessary to increase the friction, sprinkle some salt when gluing, and then wash away the salt with water after it is dry.

    This product contains toluene, please use it in a well-ventilated environment. Please stay away from areas with high heat and fire sources, avoid prolonged contact with skin, and store away from the reach of children.

    Details
    Use Aquaseal SR to permanently secure footwear at home or in the field. Formerly known as Freesole, this shoe repair glue is water-resistant and dries to a clear, flexible glue that can last for years. With just one small 1-ounce tube, you can easily complete boot repairs, create durable toe guards, and rebuild worn heels. Unaffected by heat or cold, heavy-duty shoe repair can withstand the elements whether on the job site or on the top of a mountain. From rubber boots to steel toes and everything in between, your shoes can be repaired and reinforced with Aquaseal SR.