【預售 四月下旬到貨 PRE-ORDER ARRIVAL IN SECOND HALF OF APR】 Cric Pulley Ascender

No reviews


1. 客人需於上述日期前全數付款才可享有該優惠
2. 交貨時間僅為參考 預訂貨品的交貨時間僅為估計,可能因各種原因而延遲,包括但不限於供應商延遲、運輸問題等。延遲而導致的損失本店不承擔任何賠償責任。
3. 一經支付,恕不退還

PreOrder Special at 25% off. Buy Now!

1. Customers must pay in full before the above date to enjoy this offer.
2. Delivery time is for reference only. The delivery time of pre-ordered goods is only an estimate and may be delayed due to various reasons, including but not limited to supplier delays, transportation problems, etc. We are not responsible for any liability for losses caused by delay.
3. Non-refundable

帶有整合式滑輪的多功能繩夾,適用於登山、繩索作業和救援。 它堅固、實用且直觀,具有四種不同的操作模式:上升器、滑輪、繩夾/滑輪或進度捕獲牽引滑輪。

• 其多功能性、緊湊的尺寸和易用性可以將繩索操作所需的時間、材料和空間減少到最少;
• 允許依照EN 567 / EN 12841-B標準上升繩索(上升模式);
• 可用作簡易滑輪,用於提升或轉移負載,符合EN 12278標準(滑輪模式);
• 整合式滾珠軸承滑輪可用作簡單的重新導向,以便更輕鬆地上升繩索或提升人員,而無需額外連接器的幫助(繩夾/滑輪模式);
• 它允許直接提升負載、建立牽引系統以及人員救援或自救,如受害者落入裂縫的情況(進度捕獲牽引滑輪模式);
‧滑輪模式使用時,繩索可自由雙向運行; 相反,當採用牽引滑輪方式時,繩索只能向一個方向運行,並且被鎖定在相反的方向。
• 當用於進度捕捉牽引滑輪模式時,可以透過作用於連接到裝置內凸輪的專用繩索來降低提升的負載;
• 透過直覺的釋放按鈕輕鬆打開,使設備能夠快速安裝在繩索上 - 無論使用何種模式 - 即使戴著手套或在困難條件下操作;
• 配備齒鋼凸輪,可盡量減少繩索磨損,但能有效阻擋繩索。 此外,凸輪設計有兩個槽,以減少污垢的積聚,因此在任何條件下(泥濘、冰凍的繩索等)都能非常有效地保持繩索的鎖定。

警告! 該設備不是防墜器 (EN 353-2 / EN 12841-A),也不能用於攀爬時的自我保護。




EN 567:2013
EN 12841:2006-B
EN 12278:2007

EN 1891 – EN 564 – EN 892
Ø 8 ÷ 12 毫米

EN 1891-A
Ø 10 ÷ 12 毫米

EN 1891 – EN 564 – EN 892
Ø ≤ 11 毫米

Multifunctional rope clamp with integrated pulley for mountaineering, rope access work and rescue. Robust, practical and intuitive, it has four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley.

Main features
‧ its versatility, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres;
‧ it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode);
‧ it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode);
‧ the integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode);
‧ it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in the case of a victim fallen into a crevasse (progress-capture hauling pulley mode);
‧ when used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one;
‧ when used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device;
‧ the easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be used in – even with gloves on or while operating in difficult conditions;
‧ equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope. In addition, the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.).

Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.



Country of Origin

EN 567:2013
EN 12841:2006-B
EN 12278:2007

EN 1891 – EN 564 – EN 892
Ø 8 ÷ 12 mm

EN 1891-A
Ø 10 ÷ 12 mm

EN 1891 – EN 564 – EN 892
Ø ≤ 11 mm